Steel Bars

Overview

A structural component utilised as a tie is referred to as a tie bar, sometimes known as a tie rod. Only tensile loads can be supported by tie bars. The normal tie bar simply buckles when compressed because the typical tie bar’s length to cross-section ratio is often relatively high. A tie rod’s working strength is calculated by multiplying the minimum cross-sectional area of the bar by the permitted working stress. 

In plastic injection molding machines with a medium or large weight, tie bars are frequently employed. The tie bars change how far the plate is inserted into the ring groove. Different components like tie bar nut and others together constitute a tie bar.



Tecnical Specification

Material of Construction : Alloy & Carbon Steel; C45, EN8-D, EN9, EN19, EN24, EN31, Stainless Steel 300 & 400 Series, Aluminium & Others
Diameter : 12 mm to 500 mm
Length : Upto 6000 mm
Straightness : Approximately 0.1 mm/ meter
Surface Roughness : Approximately 0.1 Ra to 0.4 Ra
Run Out : Approximately 20 to 40 Microns
Tolerances : f7,f8,h6,h9,g6, & others as required(ISO Tolerances).
Chrome Plating Thickness : 20 to 200 microns/ side
Chrome Hardness : 850 HV to 1100 HV
Induction Hardness & Depth : Upto 65HRC in depth of 2 to 5 mm per side.

Packaging

For domestic, within Ahmedabad – oiling, bubble wrapping & stretch film. For domestic, outside Ahmedabad – oiling, corrugated tube, bubble wrapping, hessian cloth, stretch film & wooden box if needed. For exports, anti-rust oil is on material and packed first by cardboard sleeve then in steel frame wooden box & pallets if needed.

Test Certificate

All goods will be sold with material test certificates to ensure proper quality from standard processing mills.

Inspection Report

Farmson engineers is very keen on quality & so before the material is dispatched, the material is passed through our QC department where it is inspected thoroughly & dispatched with our inspection report.

Our Product

Being the leading chrome plated rod manufacturers, we manufacture Burnished Hard Chrome Plated Rods, Induction hardened Chrome Plated Rods and Peeled Ground Bars. Our customised products include Guide Bars, Tie Bars and Nuts, Pins, Shafts and Piston Rod for Hydraulic Cylinder.

Download Our Brochure

Industries we Serve

We serve to a wide variety of industries including Injection Moulding, Printing & Rotogravure, Converting & Packing, Pneumatics, Hydraulics(Lift, Press, Cylinders), Pharmaceuticals, Blow Moulding, Agriculture, Marine, Defence, Chemical, Automotor, Oil & Gas, Construction, Textile, Extrusion and Stone Processing

Injection-Moulding
Blow-Moulding
Oil-and-gas
Printing-and-Rotogravure
Agriculture
Construction
Converting-and-Packing
Marine
Textile-Pneumatics
Defence
Extrusion
Hydraulics-Lift-Press-Cylinders
Chemical
Stone-Processing
Pharmaceuticals
Automotor

WHY CHOOSE FARMSON ENGINEERS?

10+ Years of Experience

10+ Years of Experience

Specialized Technical Team

Specialized Technical Team

Service(Urgent Deliveries)

Service(Urgent Deliveries)

Everything in House

Everything in House

Quality Management System

Quality Management System

Supply With Test Certificate

Supply With Test Certificate

Why Choose Products from Farmson Engineers?

Farmson Engineers is a renowned name in the field of manufacturing, supplying, and exporting hydraulic equipment throughout India. Here are a few reasons why you should choose products from Farmson Engineers.

So, whenever you are planning to buy premium quality tie bar nuts for injection molding, you can definitely reply on Farmson Engineers for all your current and future industrial demands

Customer Reviews

Our esteemed customers from different parts of India and world have shown a lot of trust since we have started our business which has made us one of the leading manufacturers of tie bar nuts for injection molding

Looking for our product? or have any query?

Please contact us now.

FAQs

Being one of the leading manufacturers of tie bar wing nuts, we have several new people who keep on enquiring about tie bar nuts to know more about them. Some of the most frequently asked questions are answered below

 

In tie bar injection molding, tie bars hold the platens straight and in place, supporting the mold in turn. The size of the mold that can be placed in the injection molding machine is constrained by the distance between the tie bars.

En19/4140 alloy steel with quench hardening is the material used to make tie bars.

At the midpoint of concrete slabs, tie bars are positioned so that they are perpendicular to the longitudinal joints. These can also be positioned directly in the gap between an edge joint and a curb or shoulder.

Tie clips and slide bars are the two most popular types of tie bars. The tie clip may open and close thanks to a hinge. The slide bars are made of a solid metal plate that slips into place.

Tie bars, which are steel bars that have been bent and coated with epoxy, are frequently positioned midway across longitudinal joints. By keeping the faces of abutting slabs in touch, they are made to avoid lane separation, and differential deflection, and reduce transverse cracks.

Get Free Quote

    GET A QUOTE